Cable pull from a scissor lift in a new warehouse

Network & structured cabling

Cat6, Cat6A and shielded cabling that keeps cameras, card readers and Wi-Fi connected. Run, labelled and tested across Toronto and the GTA.

  • 10+ years securing GTA properties
  • Licensed technicians on every job
  • 24-hour response time, guaranteed
  • Canadian-owned local roots, national reach
  • Free no-obligation estimates
Why it matters

The part of your system you’ll keep the longest.

Equipment gets replaced every few years; the cable inside your walls and ceilings often stays for much longer. Getting it right once saves you from re-pulling it later.

100 m

Per copper run

Standard Ethernet runs are designed for up to 100 metres. We plan routes and equipment locations so every camera, reader and access point stays within spec.

10 Gbps

Ready for what’s next

Cat6A carries 10 Gbps over the full 100 metres, while Cat6 reaches that speed only on shorter runs of about 55 metres. We help you choose what fits your plans.

1 cable

Power over Ethernet

One network cable can power and connect IP cameras, Wi-Fi access points and other devices, with no separate power outlet needed at each location.

Sources: TrueCable, Cat6 vs Cat6A

Cat6 vs Cat6A

Speed and distance at a glance.

Both cables carry gigabit speeds over a full 100-metre run. The difference shows up at 10 Gbps.

Maximum run at 10 Gbps

Cat6≈55 m
Cat6A100 m

Maximum run at 1 Gbps

Cat6100 m
Cat6A100 m

Source: TrueCable, Cat6 vs Cat6A

What’s included

A proactive approach that keeps your systems connected.

  • Protection & ShieldingEnsure all wiring is properly shielded and secured against environmental and physical damage.
  • Visual InspectionIdentify signs of wear, corrosion or deterioration and address minor issues promptly (additional costs may apply).
  • Connection IntegrityExamine cable terminations, connectors and routing to prevent signal loss or system disruption.
  • Damage ReportingDocument and report any visible defects requiring immediate corrective action.

This proactive approach helps maintain system stability, safety and optimal performance.

Choosing cable

Cat6, Cat6A or shielded?

We’ll recommend the right cable for each run based on distance, speed, power and the environment it passes through.

Cat6

Reliable gigabit speeds over the full 100 metres at a lower cost. A solid choice for most offices, cameras and access control.

Best for: Offices, retail, camera and access-control runs

Cat6A

Full 10 Gbps over 100 metres, better handling of high-power PoE and less crosstalk in bundled runs.

Best for: New builds, server rooms, long-life installations

Shielded cable

Extra protection against electrical interference and physical damage where cable runs near motors, machinery or power lines.

Best for: Warehouses, industrial sites, electrically noisy areas

Done properly

What good cabling looks like.

Messy, unlabelled cable makes every future repair slower and more expensive. Here is the standard we work to.

  • Planned routes. Cable is routed and supported to avoid damage, tight bends and interference.
  • Shielded and protected. Wiring is secured against environmental and physical damage.
  • Clean terminations. Connectors and patch panels are terminated and checked for connection integrity.
  • Labelled and tidy. Organized racks and labelled patch panels make future changes quick.
  • Inspected and reported. We document visible wear, corrosion or damage so you can fix it before it causes downtime.
Finished server rack with neatly dressed patch panels
How we do it

Our process.

01

Shielding and protection

All wiring shielded and protected for long-term durability, with regular visual inspections to catch deterioration early.

02

Meticulous checks and repairs

Physical conditions and connections examined, with minor repairs addressed promptly (additional costs may apply).

03

Inspection and reporting

Cables, connectors and protective mechanisms inspected, with issues documented for immediate attention.

FAQ

Questions we hear a lot.

Still unsure? Call (416) 458-8628 and talk to the team that will do the work.

Do I need Cat6 or Cat6A?

For most cameras, card readers and office connections, Cat6 is reliable and cost-effective. If you are building new, need 10 Gbps over long runs, or are powering higher-wattage devices over the cable, Cat6A is worth it. We’ll recommend run by run.

Can you fix or tidy up our existing wiring?

Yes. We inspect cable, connectors and routing, address minor repairs on the spot (additional costs may apply) and report anything that needs bigger corrective work.

Can you work in warehouses and high ceilings?

Yes. Our technicians regularly run cable from scissor lifts and boom lifts in warehouses, retail stores and new commercial buildings.

Will our cabling be documented?

We label patch panels and connections so your team, or ours, can trace any run quickly in the future.

What can we help you secure?

Get a free quote
Call us(416) 458-8628
Emailinfo@ranada.ca
Visit55 Nugget Avenue #230J, Toronto
Response24-hour service